COMMON POINT GROUNDS
10MM MALE SNAP GENERAL COMMON POINT GROUNDS
- Two banana plug hole allow two persons to ground wrist strap simultaneously
- 10mm male snap
- 5.4mm(internal diameter) of “O” ring terminal
- The OD of cord is 3mm
- 30pcs of 0.16mm Tinned copper
- The length of cord is 15ft
- Mount quickly to the soft mat
- With or without 1 megohm resistor
| Specification | Product Code |
| With One Megohm Resistor | M000M0038 |
| Without One Megohm Resistor | M000M0039 |
10MM FEMALE SNAP GENERAL COMMON POINT GROUNDS
- Two banana plug hole allow two persons to ground wrist strap simultaneously
- 10mm female snap
- 5.4mm(internal diameter) of “O” ring terminal
- The OD of cord is 3mm
- 30pcs of 0.16mm Tinned copper
- The length of cord is 15ft
- Mount quickly to the soft mat
- With or without 1 megohm resistor
| Specification | Product Code |
| With One Megohm Resistor | M000M0040 |
| Without One Megohm Resistor | M000M0041 |
10MM MALE SNAP LOW PROFILE COMMON POINT GROUNDS
- Two banana plug hole allow two persons to ground wrist strap simultaneously
- Low profile design so as to prevent the user from tripping on cord connection
- 10mm male snap
- 5.4mm(internal diameter) of “O” ring terminal
- The OD of cord is 3mm
- 30pcs of 0.16mm Tinned copper
- The length of cord is 15ft
- Mount quickly to the soft mat
- Two hole also allows mounting the common point grounds under the front edges of workstation-save work space
- With or without 1 megohm resistor
| Specification | Product Code |
| With One Megohm Resistor | M000M0017 |
| Without One Megohm Resistor | M000M0018 |
10MM FEMALE SNAP LOW PROFILE COMMON POINT GROUNDS
- Two banana plug hole allow two persons to ground wrist strap simultaneously
- Low profile design so as to prevent the user from tripping on cord connection
- 10mm female snap
- 5.4mm(internal diameter) of “O” ring terminal.
- The OD of cord is 3mm
- 30pcs of 0.16mm Tinned copper
- The length of cord is 15ft
- Mount quickly to the soft mat
- Two hole also allows mounting the common point grounds under the front edges of workstation-save work space
- With or without 1 megohm resistor
| Specification | Product Code |
| With One Megohm Resistor | M000M0019 |
| Without One Megohm Resistor | M000M0020 |