COMMON POINT GROUNDS
 
     
 
10MM MALE SNAP GENERAL COMMON POINT GROUNDS
 
     

ENLARGE

  • Two banana plug hole allow two persons to ground wrist strap simultaneously
  • 10mm male snap
  • 5.4mm(internal diameter) of "O" ring terminal
  • The OD of cord is 3mm
  • 30pcs of 0.16mm Tinned copper
  • The length of cord is 15ft
  • Mount quickly to the soft mat
  • With or without 1 megohm resistor
Specification
Part No
With One Megohm Resistor
M000M0038
Without One Megohm Resistor
M000M0039
 
     
 
10MM FEMALE SNAP GENERAL COMMON POINT GROUNDS
 
     

ENLARGE

 

  • Two banana plug hole allow two persons to ground wrist strap simultaneously
  • 10mm female snap
  • 5.4mm(internal diameter) of "O" ring terminal
  • The OD of cord is 3mm
  • 30pcs of 0.16mm Tinned copper
  • The length of cord is 15ft
  • Mount quickly to the soft mat
  • With or without 1 megohm resistor
Specification
Part No
With One Megohm Resistor
M000M0040
Without One Megohm Resistor
M000M0041
 
     
 
10MM MALE SNAP LOW PROFILE COMMON POINT GROUNDS
 
     

ENLARGE

  • Two banana plug hole allow two persons to ground wrist strap simultaneously
  • Low profile design so as to prevent the user from tripping on cord connection
  • 10mm male snap
  • 5.4mm(internal diameter) of "O" ring terminal
  • The OD of cord is 3mm
  • 30pcs of 0.16mm Tinned copper
  • The length of cord is 15ft
  • Mount quickly to the soft mat
  • Two hole also allows mounting the common point grounds under the front edges of workstation-save work space
  • With or without 1 megohm resistor
Specification
Part No
With One Megohm Resistor
M000M0017
Without One Megohm Resistor
M000M0018
 
     
 
10MM FEMALE SNAP LOW PROFILE COMMON POINT GROUNDS
 
     

ENLARGE

  • Two banana plug hole allow two persons to ground wrist strap simultaneously
  • Low profile design so as to prevent the user from tripping on cord connection
  • 10mm female snap
  • 5.4mm(internal diameter) of "O" ring terminal.
  • The OD of cord is 3mm
  • 30pcs of 0.16mm Tinned copper
  • The length of cord is 15ft
  • Mount quickly to the soft mat
  • Two hole also allows mounting the common point grounds under the front edges of workstation-save work space
  • With or without 1 megohm resistor
Specification
Part No
With One Megohm Resistor
M000M0019
Without One Megohm Resistor
M000M0020
 

 

 

 

 

ELECTRONIC KITS
BNC CABLES
BNC CABLE ASSEMBLIES AND BREAKOUTS
BANANA CORD ASSEMBLIES
GENTLE TEST LEADS
COAXIAL CABLE TEST LEADS
WRIST STRAPS
GROUND CORDS
COMMOM POINT GROUNDS
BENCH MOUNT
GROUNDING ACCESSORIES
HEEL GROUNDER
TESTERS AND MONITORS
BANK INFORMATION
CONTACT INFORMATION
HOME